I can usually tell how a boat spent its last five years just by walking up to the trailer tongue. In Brockton, the leaf springs on this rig were flattened clear out, and the winch strap had rotted straight through where the sun hit it. A couple settling an estate called us because they were moving into a condo and had no place to park a twenty-foot bass boat. It sat in the yard with a cracked windshield, split vinyl seats, and faded gelcoat, but the trolling motor was still attached to the bow.
Before our crew touched a wheel, we cleared up the paperwork. Since the vessel belonged to the estate, we verified who had legal authority to sign off, and the property owners gave us a signed release of liability. A moving van and three cars lined the narrow driveway, so we had to maneuver around them in the cold without touching the lawn. We checked the hull and motor for hazardous fluids, found no fuel leaks, and prepared the trailer. The wheel bearings were seized solid from winter moisture, so we skidded the unit onto our heavy deck and strapped it down tight.
Our vessel disposal team hauled the load away to process it properly. We stripped the electric motor and metal fittings so they could be salvaged for reuse, while the rotted fiberglass hull went to a licensed solid waste site. The family kept their receipt and went back to packing their home with one less problem parked in the snow. If you have an unwanted vessel in Plymouth County, call 866-994-1769 to set up your boat removal process.
How the boat removal process works on our jobs
Typically, we see hull drains plug up before winter hits Massachusetts. Trapped water freezes solid, cracking the transom and rusting out trailer frames from the inside. When we process a boat for disposal, clean metal like aluminum rails, stainless cleats, and copper wiring are stripped for recycling. The lead from built-in ballast or dead batteries goes to specialized refiners, while the non-recyclable fiberglass hull is ground up or landfilled.
Our Brockton boat job on one page
| Job | Removal, recycling and disposal |
|---|---|
| Boat | 1993 bass boat, about 20 feet |
| Where it sat | On a trailer in the yard of an estate the family was settling |
| Who called | A couple downsizing to a condo with no room for a trailer |
| What was wrong | Faded gelcoat, sun-split seats and a cracked windshield |
| Estimate | Estimate agreed before booking |
| Paperwork | Release of liability with the deposit |
| Area | Plymouth County, MA |
Illustrative case from Plymouth County. It does not describe a particular customer, and the photos are examples.
Boat owners in Brockton, MA often ask
Do you handle hurricane-damaged boats?
Yes. Our crew handles storm-damaged and crushed boats on yards, docks, or storage lots. We check for hazardous fluids, drain remaining fuel, and use our trailer to haul the broken hull away for proper disposal, even if the vessel is split into pieces.
Can you remove a boat that is in the water?
Yes, we manage boat removal for vessels at docks, marinas, or waterfront spaces, including sunken or partially submerged boats. We secure the craft, clear the dock, and pull the boat out safely using our gear so the marina slot is cleared completely.
Where we remove boats near Brockton, MA
We pick up boats across Plymouth County, in Bridgewater, Abington, Marshfield and North Lakeville. January cold freezes bilge water inside derelict hulls and locks up wheel hubs, making winter extractions heavy work. Snow covers hidden yard hazards, so getting a non-running boat out off a frozen lawn takes the right rig and extra care. Send photos of your boat for an upfront estimate based on boat size and site access. The minimum service charge is $400 for a basic job.
Ready to let the boat go in Brockton? Call 866-994-1769 and we’ll walk you through it.